The REVIVE 272 is BikeYoke's first seat post for seat tubes with an internal diameter of 27.2 mm. With a total length of 400mm and a stroke of 80mm, it is suitable for a wide variety of frames, but can also be shortened by cutting the outer tube to 300mm to save weight or insertion depth. In the most shortened version, the scales stop at less than 340 g.

- Design without IFP (Internal Floating Piston) valve. We believe it is too difficult, if not impossible, to achieve a truly reliable design using an IFP.
- REVIVE requires only 2 dynamic seals in the hydraulic circuit: the rod seal and the main piston seal for the locking mechanism.
- The highly critical IFP has been eliminated and with it the need for perfect concentricity and finish of the tube sealing surfaces.
- The lack of an IFP also results in the smoothest action imaginable.
- Equipped with the Reset Valve which allows you to reset the system when the stem starts to show signs of suspension. This reset valve is activated with a simple Allen key and rebalances the flow of air and oil in the system.
- The Revive is available in an 80 mm excursion.
- The cable is internal to the frame to remain sober and compact while remaining protected from external agents.

FEATURES:
- Material: aluminium
- Operation: multi-position hydraulic
- Excursion: 80 mm
- Diameter: 27.2 mm
- Reset valve to reset the system in case of suspension
- Internal routing only
- Saddle clamp compatible with round (7 x 7 mm) and oval carriages.
- Maximum rider weight: 115kg