Technical specifications:
- MTB and gravel pedals with power meter on both sides
- Pedal weight with power meter: 191.4 g
- Cadence sensor: integrated internal
> - Gyroscope: integrated internal
- Power calculation system: IAV (Instantaneous Angular Velocity-based)
- Cycling dynamics: Yes
- Data viewable via ANT+ or Favero Assioma App: Power, Cadence, PCO, Power phase (PP), Pedaling unit (PS), Torque efficiency (TE), Sitting/standing position (no Favero Assioma App)
- Data viewable via Bluetooth: Power, Cadence
- Compatible oval crowns: yes
- Battery: lithium, rechargeable
- Battery life: at least 60 hours
- Radio communication: ANT+, Bluetooth
- Power measurement accuracy: ± 1%
- Compensation thermal: -10°C / +55°C
- Waterproof rating: IP67
- Stack height: Pedal stack height: 11.2 mm, Shimano cleat height: 6.0 mm, Total stack height: 17, 2 mm
- Compatible cleats: Cleats supplied (art. 773-00-62), Shimano® SM-SH51 cleats
- Type of bike: MTB XC, CX, gravel
- Made in Italy
- Warranty: 2 years

Contents of the package:
- Left pedal with power meter
- Right pedal with power meter
- Kit of SPD® compatible MTB cleats
- 4 Washers
- Magnetic connector (2x MX- 2 |. 1x MX-1)
- 1 Y-charging cable with two micro-USBs
- 1 Greasing kit
- 1 Warranty and safety manual
- 1 Welcome flyer

Overview

The product
Assioma PRO MX is the revolutionary pedal power meter for MTB and gravel, 100% SPD® compatible. It can be used both with the supplied cleats and with the original Shimano® SM-SH51 ones. It inherits the reliability and extreme precision of Favero road potentiometer pedals, integrating unparalleled resistance to shocks and trail challenges.

Easy to install and universally compatible
The Favero Assioma potentiometer pedals PRO MX-2 can be installed and moved from one bike to another like any other pedal: in a few minutes, without special tools and without assistance from a mechanic. Thanks to the integration of both Bluetooth and ANT+, they are also compatible with the majority of cycle computers and smart watches on the market, as well as with the major training apps such as Zwift, Strava, Bkool, TrainerRoad, Rouvy and many others.

A compact pin to protect the technology
All the electronic components and the integrated rechargeable battery are completely enclosed within an extremely compact and resistant pin. Thanks to the strategic position of the rechargeable battery and the absence of external electrical contacts, thus avoiding unpleasant inconveniences of battery-related dropouts, which are typical of replaceable batteries. Furthermore, without battery compartments or compartments that can be opened and closed, water, mud and dust cannot enter, thus guaranteeing extreme reliability even in adverse weather conditions. The product is IP67 certified.

Ultra resistant against shocks and impacts
The 6061-T6 aluminum pedal body is extremely robust and ultra-light, ready to tackle the most challenging terrains. The attachment system has a surface hardness of up to 800 HV, for impact resistance never seen before in a pedal power meter.

The IAV Power system and the data measured by Assioma PRO MX-1
Thanks to the special IAV Power System, Assioma's measurements take into account our irregular pedaling (e.g. sprints, climbs) or the use of oval chainrings when calculating power, thus guaranteeing an accuracy of ±1% in any situation. Assioma PRO MX-1 offers extremely complete data reading via ANT+ and Bluetooth.

The visible data are:
Power
Cadence
PCO (Platform Center Offset)< br> PP (Power Phase)
TE (Torque Efficiency)
PS (Pedaling Uniformity)
RP (Rider Position)

Real left/right balance data, not estimated
The data provided by Assioma PRO MX-2 are based on measurements taken separately on the right and left side.
This allows you to accurately observe not only the total power, but also the left/right balance which therefore translates in a real and non-estimated data reading.

Rechargeable and eco
Assioma PRO MX uses integrated rechargeable batteries: a single charge guarantees at least 60 hours of use. Charging takes place via a magnetic system which avoids any problems linked to accidental tugging of the charging cable.

Made in Italy
Favero Electronics produces each potentiometer in its headquarters in Italy and tests its proper functioning individually through careful laboratory tests, fully satisfying the standards required by current regulations.